Latest News
November 10, 2026
As the refining industry shifts its focus from fuel production to chemical feedstock production, heavy oil hydroprocessing units are playing an increasingly important role in upgrading petroleum products....
Contact
News
85-96 of 177 results
-
Causes of Leakages of Different Buried Gas Pipes
Posted: June 8, 2021 Hits: 64The main pipes for buried gas pipelines are cast iron pipes, PE pipes, and steel pipes. The nature of each pipe determines the strength, plasticity and corrosion resistance of the pipeline. Therefore, choose suitable pipes based on research on the use environment and characteristics of... -
Causes of Cracking of Welding Seams of Power Station Boiler Tubes (Part Two)
Posted: May 24, 2021 Hits: 1611.5 Metallographic inspection Cut 3 pieces of metallographic samples along the base material of the leaking pipe, the largest opening and crack tip of the leakage port from the cross section. The etchant is the nitric acid alcohol solution with 4%. The metallographic samples are observed by... -
Causes of Cracking of Welding Seams of Power Station Boiler Tubes (Part One)
Posted: May 10, 2021 Hits: 113Abstract: The leakage at the four tubes such as the water-cooled wall, superheater tubes, reheater tubes, and economizer tubes in a power station boiler is one of the important factors that cause the unplanned shutdown of the unit. In order to deeply analyze the leakage of the butt welding seam of the reheater... -
Practical Economic Analysis of Steel Pipes and Ductile Iron Pipes in Beijing (Part Two)
Posted: March 8, 2021 Hits: 612. Economic analyses of pipes based on the internal optimized anti-corrosion coating Although epoxy ceramic internal anticorrosion will increase the investment, its roughness is small. The pipe diameter can be appropriately reduced, thereby reducing the unit price of pipeline construction and installation.... -
Practical Economic Analysis of Steel Pipes and Ductile Iron Pipes in Beijing (Part One)
Posted: February 24, 2021 Hits: 69Abstract: Steel pipes and ductile iron pipes, as the first choice in the construction industry, have their own advantages and disadvantages. The economy of pipe engineering from the perspective of investment is analyzed, providing economic value reference for the comparison and selection of engineering pipes. For... -
High Pressure Boiler Tubes
Posted: February 19, 2021 Hits: 55Features of high pressure boiler tubes The material of the high-pressure boiler tube will creep because it works under high temperature and high pressure for a long time, resulting in a decline in plasticity and toughness, change of the original structure and corrosion. The steel pipe used for the... -
Basic Measures of Corrosion Resistance of OCTG Pipes
Posted: December 24, 2020 Hits: 121The main influencing factors of corrosion of OCTG pipes PH value: Hydrogen ion is a cathode depolarizer. Generally, the lower the PH value is, the more serious the metal corrosion becomes. When the pH value is greater than 6.6, the corrosion rate begins to decrease. Cl- or total salinity:... -
2020 China (Shanghai) International Pipe and Fitting Exhibition
Posted: October 27, 2020 Hits: 90Exhibition information Name: 2020 China (Shanghai) International Pipe and Fitting Exhibition Location: Shanghai New International Expo Center, Pudong New Area, Shanghai City Time: From December 9th to 11th, 2020 Shanghai International Pipe and Fitting Exhibition is a grand event focusing on the pipe industry. The exhibition... -
The Classification and Feature of Heat-supply Pipelines
Posted: October 21, 2020 Hits: 64The classification of heat-supply pipelines According to the different flow media in the pipe, it can be divided into steam pipes and hot water pipes. According to the different working pressure, the heat-supply pipeline can be divided into three types: low pressure, medium pressure and high pressure pipelines. According... -
Classification and Specification of Welded Steel Pipes
Posted: September 29, 2020 Hits: 59Welded steel pipes, also known as seamed steel pipes, are generally made by coil weld with steel plates or band steel. Classification according to the surface treatment of pipes Welded steel pipes can be divided into galvanized and non-galvanized steel pipes. The galvanized surface of the... -
Knowledge of Common Used Seamless Steel Pipes
Posted: September 7, 2020 Hits: 60The seamless steel pipe can be divided into the following five categories. 1. Seamless carbon steel pipe Commonly used manufacturing materials are 10, 20, 16Mn steel. The specification of the pipe is as follows: Hot rolling outer diameter: φ32-630mm. Cold drawing outer diameter: φ6-200mm. Single pipe... -
An Introduction to 23mn Steel Pipe
Posted: August 29, 2020 Hits: 4223Mn (Q345B) steel pipe is a low-alloy high-strength structural steel with carbon content of 0.1%-0.25%, and main alloying elements such as manganese, silicon, vanadium, niobium and titanium are added. Its total alloy content is less than 3%. Grade A and B steels are usually called 16Mn16mn steel pipes....
Total 177 Records, 12 records per page