Latest News
November 10, 2026
As the refining industry shifts its focus from fuel production to chemical feedstock production, heavy oil hydroprocessing units are playing an increasingly important role in upgrading petroleum products....
Follow
Follow us listed below websites to get updated information of Landee Pipe.
Contact
Tel: 86-592-5204188
Fax: 86-592-5204189
[email protected]

News

73-84 of 177 results
  • How to Prevent the Defects of Pipes?

    Posted: May 9, 2022   Hits: 48
    Perforation is the first process and one of the most important deformation processes of hot rolled seamless steel pipes. Its function is to pierce the solid tube blank and a hollow tube is formed. According to the deformation characteristics of the tube blank's piercing process, it is divided into the longitudinal...
  • Requirements for the Quality of Seamless Steel Pipes

    Posted: April 16, 2022   Hits: 55
    1. The chemical composition of steel The chemical composition of steel is the most important factor affecting the performance of seamless steel pipes. It is also the main basis for formulating the process parameters of tube rolling and heat treatment of steel tubes. In the seamless steel pipe standard, corresponding requirements...
  • Factors Affecting Welding Seams of SS High Frequency Welded Pipes (Part Three)

    Posted: March 30, 2022   Hits: 63
    1.3.2 Influence of opening angle and extrusion force It is very important to ensure that the edges of the stainless steel strip are flat, smooth and have as few burrs as possible for subsequent welding. Zesheng Zhang and others found that whether the burning process of the edge is stable or not during welding...
  • Factors Affecting Welding Seams of SS High-frequency Welded Pipes (Part Two)

    Posted: March 8, 2022   Hits: 70
    At present, a lot of research is carried out on the high-frequency welding of stainless steel. Yudong Dong and others studied and analyzed the changes in the microstructure and properties of the welding seam by high-frequency welding of 12%Cr ferritic stainless steel. Zongyue Bi and others studied...
  • Factors Affecting Welding Seams of SS High-frequency Welded Pipes (Part One)

    Posted: February 27, 2022   Hits: 44
    Abstract: To ensure the quality of stainless steel high-frequency welded pipes and realize their quality control, the main factors affecting the process quality of stainless steel high-frequency welding were analyzed, including the physical and chemical properties of stainless steel, welding and forming processes....
  • Domestic Research Status of Magnetic Flux Leakage Detection Technologies

    Posted: January 14, 2022   Hits: 54
    Around 1970, China imported some magnetic flux leakage detection devices from developed countries. After that, China gradually began to conduct research on magnetic flux leakage technologies. In 1999, given China's great demand for magnetic flux leakage detection technology for steel pipes,...
  • The Status of Magnetic Flux Leakage Testing for SMLS Tubes

    Posted: December 27, 2021   Hits: 44
    In recent years, developed countries have attached great importance to the development of magnetic flux leakage detection technologies. Although the main body in many types of researches is not the seamless steel pipe, it is also crucial to the development of magnetic flux leakage detection technology for seamless...
  • Magnetic Flux Leakage Detection Systems for Seamless Steel Pipes

    Posted: December 9, 2021   Hits: 61
    Seamless steel pipes have been widely used in the delivery, construction, machinery and other fields, and play a pivotal role in the industry. They are called the vessel of modern industry. The defects of seamless steel pipes are mainly formed by the slow extension of metallurgical defects. In the subsequent...
  • Applications of Fully Automatic Ultrasonic Inspection to Welding Seams of Carbon Steel Pipelines (Part Two)

    Posted: October 27, 2021   Hits: 55
    3. Scanning tests of welding seams (1) Calibration of AUT systems: The adjusted AUT scanning device was plated on the calibration block to calibrate one by one in accordance with the simulated focus law to ensure that the amplitude of the strip scan signal of each channel was between...
  • Applications of Fully Automatic Ultrasonic Inspection to Welding Seams of Carbon Steel Pipelines (Part One)

    Posted: October 5, 2021   Hits: 41
    Abstract Automatic Ultrasonic Testing (AUT) has become the preferred testing method for welding seams of carbon steel pipes due to its high efficiency, accuracy and environmental protection. However, AUT is difficult to apply to the inspection of pipelines with a diameter of 114.3 mm (4 inches) and below due...
  • The Continuous Rolling Process of the Seamless Steel Pipe

    Posted: August 24, 2021   Hits: 622
    The development history of the continuous rolling process of the steel pipe The production of seamless steel pipes originated from the cross rolling piercing process of the MF Brothers in Germany. When they straightened round steel bars on a slanted roll straightening machine, they found that the center...
  • A Comprehensive Comparative Analysis of Pipelines in Different Materials in Gas Engineering

    Posted: July 26, 2021   Hits: 45
    A comprehensive comparative analysis of ductile iron pipes and steel pipes with different materials is carried out in this article, and a preliminary analysis of the actual engineering economic comparison results of generally buried pipelines is provided. 1. Making a comprehensive performance...
Total 177 Records, 12 records per page