Products
Latest News
26.05.2025

Enhancing Surface Quality of HFW Pipes by Adjusting Extrusion Roller Parameters

Abstract This study analyzes the causes of surface defects in high-frequency welded pipe billets, specifically, linear indentations and molten metal pits caused by the upper extrusion rollers. To address...
Follow
Follow us listed below websites to get updated information of Landee Pipe.
Contact
Tel: 86-592-5204188
Fax: 86-592-5204189
[email protected]
Heat Exchanger Tube
Home >Products >Heat Exchanger Tube

Aluminium Extruded Finned Tube, ASME SA179, 1 Inch
Aluminium Extruded Finned Tube, ASME SA179, 1 Inch
ASTM A179 Heat Exchanged Tube, 9.536M, OD 19.05MM, PE
ASTM A179 Heat Exchanged Tube, 9.536M, OD 19.05MM, PE
Display 61 - 62 of 62 Heat Exchanger Tube Result Pages: First Page  23 4