Latest News
15.11.2017

The 11th International Tube Industry Expo

Time: November 20-22, 2017 Location: Shanghai New International Expo Center Organizers: China Steel Structure Association Steel Pipe Branch, Shanghai Steel Pipe Association and Yangtze River Delta Pip...
Follow
Follow us listed below websites to get updated information of Landee Pipe.
Contact
Tel: 86-592-5204188
Fax: 86-592-5204189
sales@landeepipe.com
Technical Articles
  • Posted: 06/01/2016 17:46:24  Hits: 68
    According to the materials, cast iron pipe can be divided into: gray cast iron pipe, Ductile Cast Iron Pipe and high silicon iron pipe. Cast iron pipe is used for water supply, drainage and gas pipeline projects. In the middle and low pressure pipe network, cast iron pipe with safe and reliable operation, low damage ...
  • Posted: 05/06/2016 08:38:40  Hits: 78
    1. Argon Arc Welding Stainless steel pipes need penetrated welding without oxide impurities, having small heat-affected as possible. Argon arc welding has tungsten inert gas shield and has stable adaptability, superior welding quality, excellent penetration property, therefore the production has been widely applied...
  • Posted: 03/28/2016 17:23:07  Hits: 146
    Seamless steel pipes are widely used in various fields, but to distinguish their quality? Here are suggestions offered by Landee Pipe Company. 1. Fake seamless steel pipes are easily to have puckers. Puckers referring to all folding lines on the surface of pipes, and the defects are usually longitudinally througho...
  • Posted: 03/22/2016 16:37:20  Hits: 233
    Generally, the hardness of seamless steel pipes has three standards: Brinell Hardness, Rockwell Hardness and Vickers Hardness.   1. Brinell Hardness Brinell Hardness is the most common standard for seamless steel pipes, generally use diameter of indentation to represent the hardness of material, which is i...
  • Posted: 03/17/2016 14:07:30  Hits: 151
    No matter how sophisticated the welding technique is, there still have some common defects on the welding parts of steel pipes. 1. Bubbles. Bubbles mainly occur in the center of the welding parts; the major reason is that the hydrogen is still existing in the metal weld seams in the form of bubbles. There are seve...
  • Posted: 03/17/2016 14:01:37  Hits: 119
    There are some detailed matters need attention when welding stainless steel pipes. 1. Applied the vertical generator characteristic power, when using the direct current, apply the positive polarity (welding wire connect to negative polarity). Generally is suitable for welding thin plate about 6mm. When using this ...
  • Posted: 03/03/2016 08:45:00  Hits: 205
    The uneven wall thickness of steel pipes is mainly represented as uneven spirally wall thickness, uneven straight wall thickness and the ends are too thick or too thin, even the grinding technique is one of the important factors. The following are the reasons to cause the uneven wall thickness and corresponding measu...
  • Posted: 02/24/2016 16:41:47  Hits: 3924
    Seamless steel pipes are mainly used in oil pipeline and gas pipeline, but seldom used in oil pipelines with long-distance. Most long distance pipeline applied ERW pipes, SSAW pipes and LSAW pipes. Here are comparisons of technological features and performance of these pipes.    1. Electric Resistance W...
  • Posted: 01/12/2016 17:17:38  Hits: 211
    Generally, in terms of the surface treatment for stainless steel pipes, manufacturers have three methods, blenching treatment, polishing treatment and coloring treatment. However, it’s unavoidable to have some problems during the surface treatment, mainly are the following problems.   1. Defects of wel...
  • Posted: 01/08/2016 16:29:13  Hits: 178
    Currently, the worldwide manufactures are attach great importance to study and research of anti-corrosion to pipes, and many new materials and technologies are emerging. 1. Double epoxy (double FBE). This material was invented by an American company named OBRIEN. The material combined the corrosion resistance and ...