Latest News
13.09.2017

What Is the Water Hammer in the Pipeline? 

When sudden power cuts happen or valves are closed too fast, water shock waves will be generated like hammers beating against pipes due to inertia of pressure flows, which is known as water hammers. T...
Follow
Follow us listed below websites to get updated information of Landee Pipe.
Contact
Tel: 86-592-5204188
Fax: 86-592-5204189
sales@landeepipe.com
Services
  • Posted: 03/28/2016 17:23:07  Hits: 146
    Seamless steel pipes are widely used in various fields, but to distinguish their quality? Here are suggestions offered by Landee Pipe Company. 1. Fake seamless steel pipes are easily to have puckers. Puckers referring to all folding lines on the surface of pipes, and the defects are usually longitudinally througho...
  • Posted: 03/22/2016 16:37:20  Hits: 221
    Generally, the hardness of seamless steel pipes has three standards: Brinell Hardness, Rockwell Hardness and Vickers Hardness.   1. Brinell Hardness Brinell Hardness is the most common standard for seamless steel pipes, generally use diameter of indentation to represent the hardness of material, which is i...
  • Posted: 03/17/2016 14:07:30  Hits: 150
    No matter how sophisticated the welding technique is, there still have some common defects on the welding parts of steel pipes. 1. Bubbles. Bubbles mainly occur in the center of the welding parts; the major reason is that the hydrogen is still existing in the metal weld seams in the form of bubbles. There are seve...
  • Posted: 03/17/2016 14:01:37  Hits: 119
    There are some detailed matters need attention when welding stainless steel pipes. 1. Applied the vertical generator characteristic power, when using the direct current, apply the positive polarity (welding wire connect to negative polarity). Generally is suitable for welding thin plate about 6mm. When using this ...
  • Posted: 03/03/2016 08:45:00  Hits: 202
    The uneven wall thickness of steel pipes is mainly represented as uneven spirally wall thickness, uneven straight wall thickness and the ends are too thick or too thin, even the grinding technique is one of the important factors. The following are the reasons to cause the uneven wall thickness and corresponding measu...
  • Posted: 02/24/2016 16:41:47  Hits: 3288
    Seamless steel pipes are mainly used in oil pipeline and gas pipeline, but seldom used in oil pipelines with long-distance. Most long distance pipeline applied ERW pipes, SSAW pipes and LSAW pipes. Here are comparisons of technological features and performance of these pipes.    1. Electric Resistance W...
  • Posted: 01/12/2016 17:17:38  Hits: 210
    Generally, in terms of the surface treatment for stainless steel pipes, manufacturers have three methods, blenching treatment, polishing treatment and coloring treatment. However, it’s unavoidable to have some problems during the surface treatment, mainly are the following problems.   1. Defects of wel...
  • Posted: 01/08/2016 16:29:13  Hits: 178
    Currently, the worldwide manufactures are attach great importance to study and research of anti-corrosion to pipes, and many new materials and technologies are emerging. 1. Double epoxy (double FBE). This material was invented by an American company named OBRIEN. The material combined the corrosion resistance and ...
  • Posted: 12/25/2015 10:40:06  Hits: 190
    There are several methods of quenching the OCTG pipes, dipping, axial injection, laminar jet and laminar jet combined with axial injection. It will form the centrifugal force when quenching OCTG pipes and the centrifugal force will cause the deformation on pipes, which has serious influence on the quality and applica...
  • Posted: 12/16/2015 10:39:16  Hits: 174
    There are some features about sulfate electro galvanizing technology.   1. Optimization of sulfate galvanizing The most important advantage of sulfate galvanizing is that the current efficiency can up to 100%, and has a fast deposition rate which is incomparable to other galvanizing technique. Since the cry...