Latest News
21.09.2017

The Introduction of Cold Rolled Seamless Pipes

Cold rolled seamless pipes Cold rolled seamless pipes(GB3639-2000)are cold drawn or cold rolled precision seamless steel pipes with high accuracy of the dimension and good finish of the surface us...
Follow
Follow us listed below websites to get updated information of Landee Pipe.
Contact
Tel: 86-592-5204188
Fax: 86-592-5204189
sales@landeepipe.com
Services
Landed Pipe Division Provides pipe customers with Professional Services including Sale Services, Documents Download and Technical Articles Releasing.
  • Posted: 09/18/2017 11:04:20  Hits: 3
    What are the advantages of cold working processes compared with hot rolled processes? (1) Cold working processes can be adopted to produce thin wall pipes,extremely thin wall pipes and large diameter thin-wall pipes, small diameter pipes, capillary pipes, and all kinds of special-shaped and variable section pipes or pi...
  • Posted: 08/25/2017 16:52:34  Hits: 8
    Ductile iron pipes mainly consist of carbon, silicon, manganese, sulfur, phosphorus and magnesium. Applications Cast iron pipes with flexible joints are gravity type effluent discharge pipes, which are widely used for drainage of high-rise buildings' sewage and rain. Materials Ductile iron pip...
  • Posted: 08/17/2017 09:46:27  Hits: 2
    The square steel pipe is a term for square pipes which have the equal side length and rectangular pipes which have the unequal side length. The square steel pipe is made by the strip steel with the rolling process. Generally, the strip steel will be unpacked, flattened, curled and welded to be a round pipe, be rolled i...
  • Posted: 07/31/2017 14:05:11  Hits: 13
    The high pressure boiler pipe is a kind of boiler pipe and belongs to the seamless steel pipe, which is mainly used for manufacturing the superheater tube, the reheater tube, the gas-guide tube and the main steam pipe for high pressure and superhigh pressure boilers. Manufacturing processes of high pressure boiler pipe...
  • Posted: 07/17/2017 14:21:17  Hits: 6
    Regulations before the hydraulic pressure test of pipelines 1. Pipelines for pressure test must be tested after completed backfill. 2. For special requirements, some specific pipelines can leave pipe joints not to be backfilled, but the pipe body needs to be fully backfilled to a certain height to avoid displaceme...
  • Posted: 07/12/2017 13:13:49  Hits: 5
    Installation points of T-pipe 1. Clean debris within the groove of the T-type female end surface with wire brushes, 25mm putty grafters, brushes and rags. Check the chamfer angle of the other pipe socket, and keep the socket as well as the rubber ring clean. 2. Place the rubber ring into the groove of the female end. ...
  • Posted: 06/28/2017 17:25:12  Hits: 10
    Definition of cold galvanizing Cold galvanizing is also known as electrogalvanizing, and this kind of zinc-plated method is used for protecting metals from being corroded. We apply zinc fillers paint to the protective surfaces by any coating method, and the paint will form zinc layers after it dries, which contain up t...
  • Posted: 06/12/2017 08:33:05  Hits: 12
    We use strip steels or steel plates as billets, bend them into tube shells with different methods, and then weld them with different ways so as to obtain welded pipes with sealed cross sections formed by a certain strength welding seams. There is a wide range of materials for producing welded pipes, including carbon st...
  • Posted: 05/30/2017 15:31:30  Hits: 11
    Ductile Cast Iron Pipes are mainly used for transporting tap water and are the ideal choices for tap water pipes. Mechanical Properties Minimum tensile strength: 420/Mpa; minimum yield strength: 300/Mpa; minimum elongation: 7% . GB / T13295-2008 ISO2531-2009 Diameter: DN80-DN2600 Advantages When ductile iron pipes ar...
  • Posted: 05/24/2017 17:39:37  Hits: 14
    OCTG is a kind of upscale product made of steel pipes, and it has many kinds. There are 15 kinds of specifications for OCTG diameters, and the outer diameter ranges from 114.3mm to 508mm. There are 11 kinds of steel grades, such as J55, K55, etc. There are many types and requirements of the pipe ends' threads, and ...